Shoreline Hot Tub Spezifikationen PDF herunterladen (Seite 19)

Page

CARE FOR PILLOWS

Remove and clean the pillows with water and a soft cloth when needed. Use an approved

vinyl conditioner once a month. Remove pillows when doing chemical shock treatment.

WARNING: Do not use non approved oil-based vinyl protectants on the pillows. These

products will cause severe water clarity issues that are difficult to correct.

CARE FOR JETS

We recommend that you clean your jets when you drain your hot tub. However, if you do need

to clean your jets in between draining, this can be accomplished when the hot tub is full.

1) Remove the jet internal by turning it counterclockwise to the on position until it stops.

Continue to turn the jet past the stop point to loosen it from the hot tub. The jet internal will now

pull out.

2) Soak the jet internal in a mixture of Shoreline approved Stain and Scale inhibitor as directed.

Periodically rotate the spinner nozzle to break up residue in the jet.

3) Rinse the jet internal with warm water.

4) Re-install the jet internal into the jet body and turn clockwise until fully seated, then tug to

make sure it is seated properly. You can then continue to turn clockwise until it stops, then turn

anticlockwise to open the jet.

NOTE: A jet with stainless steel cover can be slippery. You can use a soft cloth or jar-opening

pad to assist in removing and installing the jet.

CARE FOR HOT TUB SURFACE

With a minimum amount of care and cleaning for the ShoreCast™ shell surface, your hot tub

will look “as good as new” for many years.

After draining the hot tub, wipe the surface with a soft damp cloth (or sponge) using a

Shoreline™ approved hot tub shell cleaner.

1 2 ... 14 15 16 17 18 19 20 21 22

Keine Kommentare

Shoreline Hot Tub Spezifikationen Seite 19